Idiomas disponibles
Idiomas disponibles
Diagram 1
THE OPERATING PROCEDURES
• Check aII the piping connection
for leakage before turning on the
electric power of the heater.
• Make sure that the tank is filled
up with water, otherwise, it will
cause the heating elements to
be damaged.
• Turn on the mains electrical
power supply and then adjust
the temperature knob clockwise
for higher temperature and an-
ti-clockwise for lower tempera-
ture.
• The water heater needs to be
turn on for a certain period of
time to reach the acceptable
temperature.
Diagram 2
• During the heating process, it's
normal to see a slight drip at the
safety valve. Please do not cover
up the safety valve outlet hole.
• Connect this outlet hole to a
discharge pipe. Water may drip
from the discharge pipe of the
safety valve, therefore this pipe
must be exposed to the atmos-
phere.
• The safety valve is to be ope-
rated regularly (preferably at
least every six months) to remo-
ve lime deposit and to ensure
that it is not blocked.
02
