Idiomas disponibles
Idiomas disponibles
SECURITY CHARACTERISTICS
The max inlet pressure is
0.8MPa.
•WIRE: If the power cord is
damaged. It must be replaced
by the manufacturer, its service
agent or qualified persons to
avoid a hazard!
•The pressure-relief device is to
be operated regularly to remove
lime deposits and to verify than is
not blocked.
•CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-
out, this appliance must be not
supplied through an external
switching device, such as a
timer, or connected to a Circuit
that is regularly switched on and
off by the utility.
•This appliance can be used by
children aged from 8 years and
above and persons with reduced
physic sensory or mental capa-
bilities or lack of experience and
knowledge if they have been
given
supervisión
concerning use of the appliance
in a safe way and understand
the hazards involved, children
shall not play with the appliance,
cleaning and users maintenance
shall not made by children wi-
thout supervisión.
•This electrical water heater
must be installed with a mono-di-
rectional safety valve at the inlet
pipe(blue indicator) when the
tank's pressure is over 0.8 MPa,
this will automatically active the
safety valve, water will exit at the
drain pipe outlet(Diagram 1). In
any condition, this outlet must
not be blocked.
If there is a need to empty the
water in the tank, first, cióse the
mains water. Remove the fixed
screw nail on the safety valve.
lift up the plástic handle (see dia-
gram 2) to let the water flow out
naturally.
01
instruction
