Idiomas disponibles
Idiomas disponibles
5. Close the handle adjustment. (See Figure 7)
Figure 7
Handle
Adjustment
6. Insert the suction hose into the connection nozzle.
(See Figure 8)
Figure 8
Suction
Hose
INSTALLING FILTER BAG
1.
Lift up cover latch release and remove the filter
cover.
2. Turn the filter bag lock to the right to unlock.
3. Insert the filter bag and turn the filter bag lock to the
left to lock.
4. Fit and lock the filter cover.
PAGE 5 OF 28
HANDLE ASSEMBLY CONTINUED
SETUP
7.
Insert the suction wand into the mount on the
vacuum. (See Figure 9)
Figure 9
CONNECTING MAIN POWER CABLE
TO VACUUM
1. Open the cable holder at the handle.
2. Plug the provided main cable into the socket on
the vacuum.
3. Secure the plug connection against unintentional
unplugging using the cable holder on the handle.
NOTE: Use only the main cable provided and
only replace it with an equivalent cable in
case of damage.
Suction
Pipe
0323 IH-10400
