Idiomas disponibles
Idiomas disponibles
Press Menu/Select repeatedly
until UTIL (Utilities)
appears in the LCD.
To FIRST item in
Main Menu
(TEMP Range)
DIP Switch
Settings
Only if GFCI
is enabled
Only if DEMO Mode
is enabled
Or
*****
a few seconds
utilities
Start display of string. There is a 2 second delay on each number.
Start display of string. There is a 2 second delay on each number.
Start display of string. There is a slight delay on each number.
120 or 240 VAC input power
sensed by a
UL system at startup.
Heater Type
See Page 26
Displays GFCI Test Menu
Displays Fault Log
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action" (
Menu/Select button
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
*****
ignores any change to that menu item.
3-6 or 1-3 Heater Wattage
as programmed. Displayed by a
OR
CE system at startup.
DIP Switch 1 – Test Mode Off (0) or On (1)
DIP Switch 2+3+4 = the number of HS pumps with heat
Store Settings (0) or Memory Reset (1)
N/A or Special Amperage Rule 1 or 2
When set to ON, Panel will display
alternate readings from
Senor A and Sensor B
To Set
on Main Screen
*****
Waiting a few seconds
reverts to original setting
See Page 27
Back to normal operation
)
These strings will display once
and return to the beginning.
Press Temperature again to
display the string again.
Waiting 10 seconds will allow
the screen to return to
normal operation.
Indicates a Menu Item that
Depends on a Manufacturer
Configuration and
may or may not appear.
25
