Idiomas disponibles
Idiomas disponibles
JETS
Press the
button once to turn Jet Pump 1 on, press a second time to turn Jet Pump 1 off. A built in timer willtrun the Jet Pumps off after 15min,
unless they have been tumed off manually.
For 2-speed pumps, press the
Press the
button again to change to high speed. Press the
When a
button is pushed the pump runs for 15 minutes.This duration is a safety feature of the spa. It is not recommend to be submerged in a
spa for more than 15 minutes. After 15 minutes, exit or use the cool down seat to regulate body temperature.
AUX
Press the
button once to turn Jet Pump 2 on, press a second time to turn Jet Pump 2 off. A built in timer will turn the Jet Pumps off after 15mins,
unless they have been turned off manually.
For 2-speed pumps, press the
Press the
button again to change to high speed. Press the
When a "
button is pushed the pump runs for 15 minutes. This duration is a safety feature of the spa. It is not recommend to be submerged in a
spa for more than 15 minutes. After 15 minutes, exit or or use the cool down seat to regulate body temperature.
LIGHT
Press the button
to turn the Spa Light on/of f. If lef t on, the Light automatically turns off after 4 hours.If perimeter LED lighting is fi tted, then it is
operated via same button.
NAVIGATION
Navigation is done with two or three buttons on the main menu.
En el panel TP500S se puede utilizar cualquiera de los dos botones de temperatura para navegar
El botón menu
es utilizado para elegir entre los diferentes menús.
Podemos salir de los menus simplemente esperando unos segundos.
Power-up Screens
Each time the System powers up, a series of numbers is displayed.
After the startup sequence of numbers, the system will enter Priming Mode (See Page 3).
Main Screen
Press Menu/Select.
If Time of Day is not set
"SET TIME" will
appear in this menu.
button once to start the pump in low speed.
button once to start the pump in low speed.
main menu
Main Screen
Waiting a few seconds in the Main Menu
will allow the display to revert to the Main Screen.
Most changes are not saved unless Menu/Select
Refer to key above.
button again to turn off the pump.
button again to turn off the pump.
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action" (
Menu/Select button
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
*****
ignores any change to that menu item.
Light Cycle if enabled
is pressed.
.
)
Indicates a Menu Item that
Depends on a Manufacturer
Configuration and
may or may not appear.
13
