Applications; Safety Notes - IMG STAGELINE ODC-100/RGB Manual De Instrucciones

DMX LED Spotlight
These instructions are intended for users with
basic knowledge in DMX control . Please read the
instructions carefully prior to operation and keep
them for later reference .
On page 2, you will find the spotlights ODC-
100 / RGB and PARC-100 / RGB . The menu for the
settings of the spotlight can be found on pages
78 and 79 .
Contents
1 Applications . . . . . . . . . . . . . . 14
Safety Notes . . . . . . . . . . . . . 14
2
3 Setting the Spotlight into Operation . . 15
3.1 Installation . . . . . . . . . . . . . . . 15
3.2 Barn doors . . . . . . . . . . . . . . . 15
3.3 Power supply . . . . . . . . . . . . . . 15
3.3.1 ODC-100 / RGB . . . . . . . . . . . . . 15
3.3.2 PARC-100 / RGB . . . . . . . . . . . . 16
Operation . . . . . . . . . . . . . . . 16
4
4.1 Independent operation . . . . . . . . . . 16
4.1.1 Colour spotlight and stroboscope . . . . . 16
4.1.2 Different shades of white
Storing 11 shades of colour . . . . . . . 16
4.1.3 Music control . . . . . . . . . . . . . 17
4.1.4 Show programmes and sequences of scenes 17
4.1.5 Programming sequences of scenes . . . . . 17
4.2 Synchronous control of multiple spotlights
(master / slave mode) . . . . . . . . . . . 18
4.3 Operation with a DMX controller . . . . . . 18
4.3.1 Connection . . . . . . . . . . . . . . 18
4.3.2 Setting the number of DMX channels . . . 19
4.3.3 Setting the DMX start address . . . . . . 19
4.3.4 Using subaddresses . . . . . . . . . . . 20
4.3.5 Functions of the DMX channels . . . . . . 21
5 Additional Functions . . . . . . . . . . 21
5.1 Maximum brightness of the spotlight . . . . 21
5.2 White balance . . . . . . . . . . . . . . 22
5.3 Slow response of the LEDs . . . . . . . . 22
5.4 Resetting the spotlight to its factory settings . 23
Cleaning the Spotlight . . . . . . . . . 23
6
7 Specifications . . . . . . . . . . . . . 23
14

1 Applications

This LED spotlight is used for illumination, e . g .
on stage, in discotheques and function rooms .
The light source is a powerful COB LED (COB =
chip-on-board technology): Many individual LED
chips are densely packed on a PCB to provide a
uniform light distribution .
The spotlight is designed for control via a
DMX light controller (3, 4, 5 or 10 DMX con-
trol channels), but it can also be operated in-
dependently without a controller . The ODC-
100 / RGB is weatherproof (IP 66) and therefore
also suited for outdoor applications .

2 Safety Notes

The spotlight corresponds to all relevant directives
of the EU and is therefore marked with
WARNING The spotlight uses dangerous
mains voltage . Leave servicing to
skilled personnel; inexpert han-
dling may result in electric shock .
•
The spotlight PARC-100 / RGB is suitable for
indoor use only . Protect it against dripping
water and splash water, high air humidity and
heat (admissible ambient temperature range:
0 - 40 °C) .
The spotlight ODC-100 / RGB is suitable for out-
door applications (admissible ambient temper-
ature range: −20 to +40 °C) .
•
Immediately disconnect the mains plug from
the socket
1 . if the spotlight or the mains cable is visibly
damaged,
2 . if a defect might have occurred after the
spotlight was dropped or suffered a similar
accident,
3 . if malfunctions occur .
In any case the spotlight must be repaired by
skilled personnel .
•
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug .
•
For ODC-100 / RGB only: A damaged mains
cable must be replaced by skilled personnel
only .
•
No guarantee claims for the spotlight and no
liability for any resulting personal damage or
material damage will be accepted if the spot-
light is used for other purposes than originally
.