Skip To Next Chapter/Track; Skip To Previous Chapter/Track; Return To The Beginning Of The Current Chapter/Track; Scan - Pioneer DVH-3900MP Manual De Instrucciones

DVD/VCD operation
% Press c/d (o/p on the remote con-
trol) briefly during playback to select the
next chapter/track or to return to the be-
ginning of the current chapter/track.
% Press c (o on the remote control)
twice briefly to step back to the previous
chapter/track.
% To go directly to any chapter during
playback, press DISP (DISPLAY on the re-
mote control) and press a/b to select the
chapter/track icon. Then, input the chap-
ter/track number or use c/d.
Notes
! For two-digit numbers, press the numbered
buttons (0 to 9) in rapid succession.
! On a Video CD with PBC, you must set PBC to
Off on the setup menu. Refer to PBC on page
29.

Skip to next chapter/track

% Press briefly d (p on the remote con-
trol) to select the next chapter or track.

Skip to previous chapter/track

% Press briefly c (o on the remote con-
trol) and press again within four seconds
of playing time.
Return to the beginning of
the current chapter/track
% Press briefly c (o on the remote con-
trol) after four seconds of playing time.

Scan

1 Press m/n on the remote control
during playback.
2 Press m/n repeatedly on the re-
mote control to select the required speed:
m ×2, m ×4, m ×8, m ×16, m ×32,
m ×100 (backward) or n ×2, n ×4, n
×8, n ×16, n ×32, n ×100 (forward)
# With a Video CD, the scan speed changes:
m ×2, m ×4, m ×8, (backward) or n ×2,
n ×4, n ×8, (forward).
3 To return to normal playback, press d/
PAUSE (PLAYd on the remote control).

Repeat

- Chapter/Title/Off
DVD
The default settings is Off.
1 To repeat the chapter currently playing,
press RPT (REPEAT on the remote control).
The Chapter icon appears on the TV screen.
2 To repeat the title currently playing,
press RPT (REPEAT on the remote control)
again.
The Title icon appears on the TV screen.
3 To exit the repeat mode, press RPT
(REPEAT on the remote control) again.
The Off icon appears on the TV screen.
- Track/All
VCD
The default settings is All.
1 To repeat the track currently playing,
press RPT (REPEAT on the remote control).
The Track icon appears on the TV screen.
Section
10
33
En