Specific Safety Rules For Arc Welders; Important; Features - Urrea SOL83020 Manual De Usuario

IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
SPECIFIC SAFETY RULES FOR
ARC WELDERS
Each item listed below must be carefully
checked before operation:
• Make sure that the welding machine has reli-
able earth connection.
• Make sure that there is always sound output
and input wire connection without any short
circuit of the output side.
• Make sure there is always sound Insulative
protection of the input and output wire and
reliable connection.
Regular check needs to be conducted by the
qualified personnel after the welder has been
installed over a period of not later than six
months, which involves as follows:
• Routine cleaning needs to be done to make
sure that there is no abnormal loose parts hap-
pening in the welding machine while regular
dust cleaning is necessary.
• Check the welding cable to see if it can con-
tinue to be used before it is worn out.
• Replace the welder's input cable as soon as it
is found to be broken or damaged.
• Make sure whether there is enough power
supply to make the welding machine work
properly and the input power must load the
safety protection device.
WARNING: Cut off the power supply before
opening the case to check.
IMPORTANT: Please do not hesitate to con-
tact the manufacturer or the agent for tech-
nical assistance whenever you come across the
problems you can not work out or you may
deem difficult to fix.
Should take into consideration the following
precautionary measures since the distance be-
tween the operator and welding equipment in
remote locations can cause the operator can
not monitor or cable equipment.
10
• Extend the cable length Welding equipment
to prevent ov heating.
• Strengthen protection equipment Welding
wire and cable remote to avoid being crushed,
bruised or otherwise damaged.
• Post a sign at the installation site to say
"WELDING EQUIPMENT IN USE, DO NOT
TOUCH" to prevent other people to come and
be touched.

FEATURES

Arc Welder is an arc welding power source
manually operated by a single person. The
main parts of this machine are transformer,
rectifier and reactor. It is current stepless ad-
justment welding machine. It is characterized
by soft and stable arc, little spatter and good
welding performance. This machine can work
with acid electrode, alkaline electrode and cel-
lulosic electrode. It can get satisfied effect to
welding mild steel, medium carbon steel, mild
alloy steel, stainless steel and some nonferrous
metals such as nickelic alloy and copper alloy.
It can be used in ship building, boiler, pressure
container, construction, electric power, mining
machinery industries.
WELDER'S STRUCTURE
Arc Welding Machines adopts the movable
box like structures. With a handle, wheels and
hoisting ring at the top of the case and four
wheels at the bottom, it is very convenient to
carry and transport. There are switch, power
indicating light, current adjusting hand wheel,
output socket on the front panel (AC/DC), and
cooling fan, power input connection box and
earth bolt on the back of machine.
KNOW YOUR TOOL
2
3
4
5
6
7
1