Intercom Between Handsets; Handset Ring Tone & Volume Setting - Daewoo DTD-7500 Manual De Instrucciones

54. INTERCOM BETWEEN
HANDSETS
1. This function is available when two
or more handsets are registered to
the same base.
2. Base must be powered up in order
for the intercom function to work.
Intercom from Handset 1 to Handset
2.
3. While in the standby mode, press
PAGE key on handset 1, the LCD will
display "HS ?".
4. Input "2" and the display shows
"CALLING HS 2".
Handset 2 will ring.
5. The user on Handset 2 activates key
of Handset 2 to enter talking mode.
6. Press key of any of the two
handsets to end the intercom mode
and returns to the standby mode.
55. HANDSET RING TONE &
VOLUME SETTING
11. While off-line, press
it displays "CALL LOG".
2. Press or
"HS SETTINGS".
3. Press key and it displays
"AUDIO SETTING".
4. Press or
to "RING SETUP".
5. Press key and the screen
displays "INT RING".
6. Press or
"INT RING" or "EXT RING".
(INT RING means setting the internal
intercom ringer.)
(EXT RING means setting the
external incoming call ringer.)
External incoming call ringer
7. While "EXT RING" is shown, press
to select.
8. Press key and the screen
key and
key to scroll to
key and to scroll
to display either
displays "MELODY".
9. Press key and the screen
displays the current ringer and
sound the current ringer, such
as "MELODY 1".
10. Press or
to different ringer melody (ten
different ringer sounds are
available)
11. After selecting the ringer sound,
press key to confirm and the
screen displays "MELODY" again.
12. Press or
"VOLUME".
13. Press key and the screen
displays current volume of ring
tone, such as "VOLUME 3"
14. Press or
different ring volume (5 levels)
15. Press key to confirm the new
selection on display. A sound of "di
du" indicates a successful selection.
16. Press key to exit to standby
mode
INTERNAL INTERCOM RINGER
1. While off-line, press
displays "CALL LOG".
2. Press or
"HS SETTINGS.
3. Press key to confirm and it
displays "AUDIO SETTING"
4. Press or
"RING SETUP".
5. Press key and the screen
displays "INT RING".
6. Press key to confirm and the
screen displays "MELODY".
7. Press key and the screen
displays the current ringer and
sound the current ringer, such
as "MELODY 1"
8. Press or
different ringer (five different
internal ringer sounds)
9. After selecting the ringer sound,
press key to confirm and the
44
key to scroll
to display
to scroll to
key and it
key to scroll to
key to scroll to
key to select