Register /Removing A Handset; Call Transfer And Intercom; Call Transfer And Conference Call During An External Call - Daewoo DTD-1100 Manual De Usuario

All manuals and user guides at all-guides.com
2. Use or keys to select the number of the base unit you
would like to register the handset to (1-4). The unit ask for the PIN
code (4 digits, default one is 0000), then the display will show
'PRESS BASE' , now you need to disconnect the main base from
the power plug so that it starts looking for handsets. After this the
base station will be in registration model for 3 minutes.
3. When the handset is registered, it will show 'DAEWOO' followed
by the handset number.
9.2 Removing a handset
1. You can remove a handset from a base to allow another handset
to be registered:
2. Press key. Use
REGISTER' and press
3. Enter the pin code '0000' and press
4. Enter the handset number (1-5) you want to remove and press
key. The unit will go back to Menu, the removal is done.
5. If not, it will ask again to enter the handset number.
NOTE: You can only remove existing handsets and others than the one
you are using. These functions only work when more than one handset
(like a Twin/ Triple/ Quattro version) is registered to the base.
10. Call Transfer and Intercom between Two
Handsets

10.1 Call transfer and conference call during an external call

During an external call, press
the other handset. The other handset will start to ring:
When the other handset takes the line you can talk internally.
If you hang up, the external line will be connected with the other
handset.
or keys to scroll to 'DE-
key.
key.
key followed by the number (1-5) of
17