Handset De-Register; De-Register All Handsets; Dialing Mode Setting (Tone Or Pulse) - Daewoo DTD-7500 Manual De Instrucciones

need to do this step if you bought
an extra handset for the system.
A maximum of five handsets is
allowed)
1. Press PAGE key on the base for
about 6 seconds while offline, the
base starts flashing followed by a
loud beep. This indicates the base
is ready for handset registration.
(Please complete the following steps
in less than 120 seconds).
2. While off-line, press and hold
the PAGE key on the side of the
handset for about 5 seconds. It will
beep once and the screen displays
"SEARCHING 1".
3. Wait about 10 seconds for
registration to take place. A long "du
di du" sound indicates success.
(Note: After registering the handset
to base, the antenna symbol will
appear steady on the top left
corner of the LCD. If handset and
base aren't registered, the antenna
symbol and handset name will be
flashing.)

35. HANDSET DE-REGISTER

Note: This function is used when
there is a need to free up a handset
registration, so a new handset may
be added to the base.
1. Press key while off-line, and
the screen displays "CALL LOG".
2. Press or
SETTINGS"
3. Press key and the screen
displays "DELETE HS"
4. Press key and it displays PIN?
Then press number keys to input
password to confirm. (factory
default PIN = "0000")
5. Press key and it displays the
key to scroll to "BS
handset for de-register, or press
or to select other handset to de-
register.
6. Press key with a sound of "di
du" meaning successful de-register,
if sounds of "di...", it means failed
deregister. (Note: The handset on
which this step is being performed
can not be deregistered)
7. Press key to transfer to offline.

36. DE-REGISTER ALL HANDSETS

1. Press PAGE key of base for 5
seconds and the base red light starts
flashing.
2. Press the PAGE key again of base
seven more times at a normal pace,
the ringer flasher indicator should
flash at a faster speed than before
indicating de-register process is in
progress.
3. De-register is complete when the
indicator light goes out followed by
a beep.
4. All previously registered handsets
are now deregistered.
5. You must register the handsets
you want again.
37. DIALING MODE SETTING (TONE
OR PULSE)
(DTD-7500 is factory preset for tone
dialing)
1. While off-line, press
displays "CALL LOG".
2. Press or
SETTINGS" function
3. Press key, then it displays
"DELETE HS"
4. Press or
"DIAL MODE"
5. Press key and it displays
"TONE" or "PULSE"
6. Press or
"TONE" or "PULSE" mode.
39
key and it
key to scroll to "BS
key to scroll to
key to select