Answering A Call; Speakerphone; Making A Call; Handset Mute - Daewoo DTD-7500 Manual De Instrucciones

Handset Basic Functions

9. ANSWERING A CALL

1. Press key when phone rings.
2. (Press again to engage
speakerphone if need).
3. Press key to end the call.

10. SPEAKERPHONE

1. Press key twice to turn on the
speaker.
2. Press key again to toggle back
to handset receiver.

11. MAKING A CALL

1. Enter phone number and confirm
on display.
2. Press key to go on-line and
dial.
3. (Press again to engage
speakerphone if need).
4. Press key to end the call.

12. HANDSET MUTE

1. While on a call, press
the handset for privacy.
2. Press again to un-mute.
13. VOLUME CONTROL (RECEIVER
AND SPEAKERPHONE)
While on a call, press
the handset (side) to change volume
setting. Volume setting is indicated
as VL1 to VL5 on screen.

14. AMPLIFY FUNCTION

1. While on a call, press
add an extra level of amplification
(35 dB) to the receiver volume.
This is indicated by an illuminated
key.
2. Press
extra lever of amplification
(35 dB).
15. AUTOMATIC
FUNCTION SWITCHES
The
automatically each time the phone
is being used. This automatic setting
can be selected via a slide switch
and is recommended for a single
user household.
Warning: If there are both normal
and hard-of-hearing users, please do
not use the automatic ON setting.
This protects normal hearing users
from sudden acoustic shock due to
loud volume setting.
Talking CID and Talking Keypad
feature can also be set to ON /
OFF via a second slide switch.
1. Open battery compartment
to mute cover to expose two small slide
switches as shown.
2. Slide Switch 1 to ON if you want
to get the Automatic AMP.
3. Slide Switch 2 to ON for talking
CID and talking keypad.
key on (Note: Both switch functions can
be altered by changes made in
"HS SETTINGS" sub-menu and
vice-versa).

16. HANDSET TONE CONTROL

key to 1. While on a call and
(illuminated), digital tone control
becomes active.
35
key again to disable the
& TALKING
function can be set to ON
is active