Idiomas disponibles
Idiomas disponibles
Inserting the paper filter bag
Release and remove the suction head.
Insert the paper filter bag or the mem-
brane filter (special attachment).
Insert and lock the suction head.
Wet vacuum cleaning
Inserting the rubber lips
Remove the brush strips (4).
Insert the rubber lips (5).
Note
The structured side of the rubber lips must
point outwards.
Remove the paper filter bag
10
English
– If the appliance is used to vacuum wet
dirt the paper filter bag or the membrane
filter (special accessory) must always
be removed.
– It is recommended to use a special filter
bag (wet) (see Filter systems).
Warning
The flat pleated filter must must always be
in place while vacuuming.
– If wet dirt is vacuumed with the uphol-
stery or crevice nozzle, or if water is
sucked up from a container, it is recom-
mended to deactivate the "automatic fil-
ter cleaning" function.
– If the maximum liquid level is reached
the appliance will turn off automatically.
– In case of non-conductive liquids
(such as emulsion drilling fluids,
oils, and greases) the appliance is
not turned off when the container is
full. The filling level must be continu-
ously monitored and the container
must be emptied in time.
– After having completed the wet vacuum
operation clean the flat pleated filter, the
electrodes and the container and let
dry.
Clip connection
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.
