Stihl BR 450 C Manual De Instrucciones página 14

English
Mounting the Control Handle
3
2
Push the control handle (1) onto the
N
mount (2) .
Insert and tighten down the
N
screws (3).
6
4
5
Engage the throttle cable (4) with
N
sleeve (5) in the hose clamp (6).
12
Adjusting the control handle
1
Open the clamping lever (3).
N
Move the control handle (1) along
N
the blower tube (2) to the most
comfortable position.
Close the clamping lever (3).
N
Adjusting the Blower Tube
1
Loosen the union nut (1).
N
Pull the blower tube (1) out to the
N
required length.
Tighten the union nut (1).
N
1
2
3
2
Wear Mark on Nozzle
The front end of the nozzle wears away
due to abrasive ground contact during
operation. The nozzle is subject to
normal wear and tear and must be
replaced when the wear mark is
reached.
Transport Aid
When storing or transporting the
machine:
Secure the blower tube to the
N
handle on the backplate with the
hook and loop fastener.
BR 450, BR 450 C