Electrical Connection; Automatic Installation - Ascaso BIG DREAM 2GR Manual De Usuario

5.2 INSTALLATION – ELECTRICAL CONNECTION
• The details of the electrical power supply must match those given on the nameplate.
• The electrical power supply should be equipped with the appropriate multiple-pole
switch (circuit-breaker or differential) before the machine's main switch, with a
minimum contact opening of 3 mm.
• The connection of the machine to the earthing ( ) should comply with the electrical
regulations currently in force in the place where the machine is installed.
• Equipotential bonding: to comply with certain regulations, the machine is provided
with equipotential bonding to avoid any difference in the electrical potential of the
earthing between appliances installed in the same premises.

5.3 AUTOMATIC INSTALLATION

The machine is pre-set at the factory for the start-up operation to be done automatically.
a) Once the electrical and water connections have
been completed and the drainage connected,
you can turn on the machine by the main switch.
I = ON
0 = OFF
12