Ohyama WOOZOO IHF-1201G-E Manual De Usuario página 36

Installation of indoor unit
Note:
● Pay attention to dust prevention
and take relevant safety measures
when opening the hole.
Step four: outlet pipe
1. The pipe can be led out in the
direction of right, rear right, left or
rear left.
Right
Step five: connect the pipe of indoor unit
1. Aim the pipe joint at the corresponding
bellmouth.
2. Pretighten the union nut with hand.
3. Adjust the torque force by referring to the following sheet. Place the open-end
wrench on the pipe joint and place the torque wrench on the union nut. Tighten
the union nut with torque wrench.
Indoor
5-10
2. When select leading out the pipe
from left or right, please cut off the
corresponding hole on the bottom
case.
Left
Rear left
Pipe joint
33
Outdoor
Φ55/
Φ70
Right
Cut off
the hole
Union nut Pipe
In
T
4.
St
1.
2.
N
●
●
St
1.