Idiomas disponibles
Idiomas disponibles
Introduction for buttons on remote controller
● When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator "
" on indoor unit is ON (This indicator is not available for some
models). Press "▲" or " " button to adjust set temperature. Press "FAN" button
to adjust fan speed. Press "
only unit won't receive heating mode signal. If setting heat mode with remote
controller, press ON/OFF button can't start up the unit).
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay
1~5 minutes to blow air (actual delay time is depend on indoor ambient
temperature).
● Set temperature range from remote controller: 16~30°C (61-86°F);
Fan speed: auto, low speed, low-medium speed, medium speed, medium-high
speed, high speed.
● Under auto mode, temperature can be displayed; Under auto mode, set
temperature can be adjusted.
3
FAN button
This button is used for setting Fan Speed in the sequence that goes from AUTO,
,
,
to
Auto
Low speed
Note:
● It's Low fan speed under Dry mode.
● X-FAN function: Hold fan speed button for 2s in COOL or DRY mode, the icon
"
" is displayed and the indoor fan will continue operation for a few minutes in
order to dry the indoor unit even though you have turned off the unit. After
energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or
HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed
after the unit is stopped to avoid mould.
Having set X-FAN function on: After turning off the unit by pressing ON/OFF
●
button indoor fan will continue running for a few minutes. at low speed. In this
period, Hold fan speed button for 2s to stop indoor fan directly.
Having set X-FAN function off: After turning off the unit by pressing ON/OFF
●
button, the complete unit will be off directly.
4
TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode. "
" icon is displayed on remote controller. Press this button again to
exit turbo function and "
" / "
" button to adjust fan blowing angle. (Cooling
, then back to Auto.
Low-Medium speed
Medium-High speed
" icon will disappear.
11
Medium speed
High speed
In
If s
so
5
● P
H
c
t
● W
a
6
Pre
circ
,
No
● P
f
p
● U
p
t
c
● T
7
Pre
circ
● W
l
● W
H
● W
H
● H
y
