Idiomas disponibles
Idiomas disponibles
Malfunction analysis
Phenomenon
● Power failure?
● Is plug loose?
● Air switch trips off or fuse is
burnt out?
Air condi-
tioner can't
● Wiring has malfunction?
operate
● Unit has restarted immediately
after stopping operation?
● Whether the function setting
for remote controller is
correct?
● Indoor temperature and
Mist is
humidity is high?
emitted from
indoor unit's
air outlet
Set
● Your required temperature
temperature
exceeds the set temperature
can't be
range?
adjusted
● Voltage is too low?
Cooling
● Filter is dirty?
(heating)
● Set temperature is in proper
effect is
range?
not good.
● Door and window are open?
Check items
23
Solution
● Wait until power recovery.
● Reinsert the plug.
● Ask professional to replace
air switch or fuse.
● Ask professional to replace
it.
● Wait for 3min, and then turn
on the unit again.
● Reset the function.
● Because indoor air is cooled
rapidly. After a while, indoor
temperature and humidity
will be decrease and mist
will disappear.
● Set temperature range:
16°C~30°C.
● Wait until the voltage
resumes normal.
● Clean the filter.
● Adjust temperature to
proper range.
● Close door and window.
M
P
