Idiomas disponibles
Idiomas disponibles
Introduction for buttons on remote controller
Note:
● This is a general use remote controller, which can be used for multifunctional air
conditioning. For some functions that this appliance does not have, press the
corresponding button on the remote controller, and this appliance will remain in
its original running status.
● After putting through the power, the air conditioner will give out a sound.
Operation indicator "
different colors). After that, you can operate the air conditioner by using remote
controller.
● Under on status, pressing the button on the remote controller, the signal icon "
on the display of remote controller will blink once and the air conditioner will give
out a "di" sound, which means the signal has been sent to the air conditioner.
● As for the models with functions of WiFi or wired controller, the indoor unit must
has been controlled by standard remote controller under auto mode first, and
then the function of adjustable temperature under auto mode can be realized by
APP or the wired controller.
● This remote controller can adjust the temperature under auto mode. When
matching with the unit which is without the function of adjustable temperature
under auto mode, the set temperature under auto mode may be invalid, or the
displayed set temperature on the unit is not same as that on the remote
controller under auto mode.
1
ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit.
2
MODE button
Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate automatically according
to the sensed temperature. Press "FAN" button can adjust fan speed.
Press "
● After selecting cool mode, air conditioner will operate under cool mode. Cool
indicator "
e
models). Press "▲" or " " button to adjust set temperature. Press "FAN" button
s.
n
to adjust fan speed. Press "
● When selecting dry mode, the air conditioner operates at low speed under dry
mode. Dry indicator "
some models). Under dry mode, fan speed can't be adjusted.
Press "
● When the fan mode is selected, the air conditioner only blows the fan, no cooling
and no heating. All indicators are OFF, Operation indicator is ON. Press "FAN"
button to adjust fan speed. Press "
" is ON (red indicator light, different models have
AUTO
COOL
" / "
" button can adjust fan blowing angle.
" on indoor unit is ON (This indicator is not available for some
" / "
" on indoor unit is ON (This indicator is not available for
" / "
" button to adjust fan blowing angle.
DRY
FAN
HEAT
" button to adjust fan blowing angle.
" / "
" button to adjust fan blowing angle.
10
"
