Makita MLS100 Manual De Instrucciones página 8

1
007771
To remove the blade, use the wrench to loosen the hex
bolt holding the
counterclockwise. Raise the blade guard and center
cover.
1
007774
Press the shaft lock to lock the spindle and use the
wrench to loosen the hex bolt clockwise. Then remove
the hex bolt, outer flange and blade.
1
007770
To install the blade, mount it carefully onto the spindle,
making sure that the direction of the arrow on the
surface of the blade matches the direction of the arrow
on the blade case. Install the outer flange and hex bolt,
and then use the wrench to tighten the hex bolt
(left-handed) securely counterclockwise while pressing
the shaft lock.
1. Wrench
2. Center cover
2
center cover by
1. Hex bolt
1. Hex bolt
2. Wrench
2
1
007808
1
turning it
001786
Install the outer flange and hex bolt, and then use the
wrench to tighten the hex bolt (left-handed) securely
counterclockwise while pressing the shaft lock.
Return the blade guard and center cover to its original
position. Then tighten the hex bolt clockwise to secure
the center cover. Lower the handle to make sure that the
blade guard moves properly. Make sure shaft lock has
released spindle before making cut.
Dust bag
1
007775
007776
The use of the dust bag makes cutting operations clean
and dust collection easy. To attach the dust bag, fit it
onto the dust nozzle.
8
2
4
3
2 4 5
3
1
1. Blade case
2. Arrow
3. Arrow
4. Saw blade
1. Hex bolt
2. Outer flange
3. Saw blade
4. Inner flange
5. Spindle
1. Dust bag
1. Fastener