Oerlikon CITOSTEEL 255C Manual De Instrucciones página 20

Figure 22.

Rename job – turn Right Knob [36] to select:
numbers 0-9, letters A-Z, a-z. Press Right Knob [36]
to confirm first character of the name.

Next characters are selected in the same.

To confirm the name of job and back to the main
menu press Button [37] or Left Knob [35].
Load memory
Recall the stored programs from the user
Memory.
To recall the Welding Program from the User Memory:
Note: Before using, the Welding Program had to be
assigned to the user memory

Add the Load memory icon to the Welding Parameters
Bar.

Use the Right Knob [36] to highlight the Load memory
icon.

Press the Right Knob [36] to confirm – the Load
Memory Menu is shown on the display.

Use the Right Knob [36] to highlight the Memory
number which from the Welding Program will be
recall.

Confirm the select – press the Right Button [36].
USB
When the USB storage device is connected to
USB port – user have access to:
Table 10. USB Menu
Symbol Description
Save
Load
Save - the following data can be save on a USB Memory
Stick:
English
Table 11. Save and restore selection Symbol
Current Welding Settings
Advanced Parameters Configuration
(P menu)
All welding programs stored in user
M
memory
One of the welding programs stored in user
memory
To save data into USB device:

Connect the USB to welding machine.

Add USB icon to the Welding parameters bar [44].

Use the Right Knob [36] to highlight the icon "USB".

Press the Right Knob [36] to confirm the selection – the
USB menu is shown on the display.

Use the Right Knob [36] to highlight the icon "Save".

Press the Right Knob [36] to get access of Save
option – the save menu is shown on the display.
17
Description
Figure 23.
Figure 24.
English