Makita DRT50 Manual De Instrucciones página 18

1
2
► 1. Screw 2. Knob type grip
Using the tool with the plunge base
Always hold the grips firmly with both hands during
operation. Operate the tool in the same way as the
trimmer base.
Using the straight guide
Optional accessory
1. Install the straight guide to the guide holder by
tightening the wing nut. Insert the guide holder into the
holes in the plunge base, and then tighten the wing
bolts.
► 1. Wing bolt 2. Guide holder 3. Wing nut 4. Straight
guide
2.
Loosen the wing nut on the straight guide and
adjust the distance between the bit and the straight
guide. At the desired distance, tighten the wing nut.
► 1. Wing nut
1
2
3
4
1
18 ENGLISH
3. Operate the tool in the same way as the straight
guide for the trimmer base.
Using the templet guide
Optional accessory
1.
Loosen the screws on the base and remove them.
Place the templet guide on the base, and then tighten
the screws.
1
► 1. Screw 2. Templet guide
2. Operate the tool in the same way as the templet
guide for the trimmer base.
2