Sennheiser IE 600 Instrucciones De Manejo página 12

Ocultar thumbs Ver también para IE 600:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
English | IE 600
Specifications
dynamic, Extra Wide Band
Transducer principle
(XWB)
Transducer size
7 mm
Frequency response 4 to 46,500 Hz
Frequency
diffuse-field equalized
characteristic
Ear coupling
in-ear, closed
Impedance
18 Ω
Sound pressure level 118 dB at 1 kHz, 1 Vrms
THD
< 0.06 % (1 kHz, 94 dB)
26 dB
Attenuation
oxygen-free copper cable
(OFC), para-aramid rein-
Cable
forced,
ear hooks: TPU-coated
gold-plated;
on the earphones:
Connectors
MMCX connectors
(see pin assign-
on the device:
ment on inside cover
stereo jack plugs
page)
3.5  m m, unbalanced, 3-pin
4.4  m m, balanced, 5-pin
approx. 6 g per ear canal
Weight
phone (without cable)
Operating
10 °C to +55 °C
temperature
Maximum value of
the static magnetic
1.6 mT
field at the surface
8
Manufacturer declarations
For more information on regulatory compliance
markings, see the inside back cover.
Warranty
Sonova Consumer Hearing GmbH gives a war-
ranty of 24 months on this product. For the
current warranty conditions, please visit our
website at www.sennheiser-hearing.com/
warranty or contact your Sonova Consumer
Hearing partner.
The Australia and New Zealand Warranty Condi-
tions can be found on the inside back cover.
In compliance with the following
requirements
• General Product Safety Directive
(2001/95/EC)
Compliant to Sound Pressure Limits according
to country specific requirements.
EU declaration of conformity
• RoHS Directive (2011/65/EU)
The full text of the EU declaration of conformity
is available at the following Internet address:
www.sennheiser-hearing.com/download.
UK declaration of conformity
• RoHS Regulations (2012)
Notes on disposal
• EU: WEEE Directive (2012/19/EU)
• UK: WEEE Regulations (2013)
The symbol of the crossed-out
wheeled bin on the product, the
battery/rechargeable battery (if ap-
plicable) and/or the packaging indicates that these
products must not be disposed of with normal house-
hold waste, but must be disposed of separately at
the end of their operational lifetime. For packaging
disposal, observe the legal regulations on waste seg-
regation applicable in your country. Improper disposal
of packaging materials can harm your health and the
environment.
The separate collection of waste electrical and elec-
tronic equipment, batteries/rechargeable batteries
(if applicable) and packagings is used to promote the
reuse and recycling and to prevent negative effects
on your health and the environment, e.g. caused by
potentially hazardous substances contained in these
products. Recycle electrical and electronic equipment
and batteries/rechargeable batteries at the end of
their operational lifetime in order to make contained
recyclable materials usable and to avoid littering the
environment.
If batteries/rechargeable batteries can be removed
without damaging them, you are obliged to dispose
of them separately (for the safe removal of batteries/
rechargeable batteries, see the instruction manual of
the product). Handle lithium-containing batteries/re-
chargeable batteries with special care, as they pose
particular risks, such as the risk of fire and/or the risk
of ingestion in the case of coin batteries. Reduce the
generation of battery waste as much as possible by
using longer-life batteries or rechargeable batteries.
Further information on the recycling of theses prod-
ucts can be obtained from your municipal
administration, from the municipal collection points,
or from your Sonova Consumer Hearing partner.
You can also return electrical or electronic equip-
ment to distributors who have a take-back obligation.
Herewith you make an important contribution to the
protection of the environment and public health.
loading