Idiomas disponibles
Idiomas disponibles
Fig. 2: Overflow compartment incl. piping
1. Return line to the aquarium
2. Emergency overflow
3. Filter inlet (easy drain)
Available spare parts: Please refer to www.aqua-medic.de.
Mount the cabinet and aquarium according to the attached instructions.
Always re-tighten all bushings before use. The rubber slide ring must always be attached to the side of the
rotable nut, the rubber gasket on the opposite side of the panel.
For installation, the base must be level, horizontal and sufficiently stable. To avoid condensation, it
is important that the room where the aquarium is put up is well-tempered. A space of at least ten
centimeters should be left on the back of the cabinet and aquarium for ventilation and for laying
cables with plugs.
Fig. 3: Bushing or tank fitting (the glass pane is placed between slide ring 3 and rubber ring 2)
1.
Thread
2.
Rubber sealing
3.
Slide ring
4.
Nut
9
