PISTOL RACK ASSEMBLY
Remove the shelf from the safe if it has already
been installed. Position the pistol rack on the back
edge of the shelf and mark the hole locations on the
rack onto the shelf. Remove the rack. Place the
shelf on a sturdy at surface and drill (2) .093
diameter x .5 inch deep pilot holes where you
marked the rack hole locations. Assemble the rack
to the shelf with (2) .5 inch screws. Install the shelf
inside the safe per the instructions. Hang the
pistols below the shelf as shown.
SHELVES
e shelves can be installed by locating the shelf clips
to the desired location and se ing the shelf in place.
DOOR ORGANIZER ACCESSORY
Make sure the items stored on the door do not
interfere with guns or valuables stored inside in the
safe or when closing the safe door.
5
40529-1504
24