Direct Setting Of Temperatures - Xylem SI Analytics CT 72/P Manual De Instrucciones

5.2.

Direct setting of temperatures

6. Safety installations, warning functions
SECVAL
(Security Values)

SAFETMP

AL-TYPE

OVERTMP

SUBTEMP
Safety installations, warning functions
The circulator uses the setpoint of SETPNT 1 or 2 or 3 for temperature control
The indicated setpoint temperature can be changed directly any time.
Example: change 25.00 °C to 45.00 °C
1. By pressing the key
example on the left: >SETPNT / 1 25.00°C<.
The integer digits flash
2. By pressing the keys
is confirmed by pressing the
The decimal digits flash and can be adjusted if desired.
Confirm once more by pressing the

The circulator uses the new working temperature value for temperature control.

The temperatures can be set in start or stop mode.
Check the safety installations at least twice a year! Refer to ( page Fehler!
Textmarke nicht definiert.)
Settings for the excess temperature protection > SAFETMP<
and for the warning functions for high > OVERTMP< and low > SUBTEMP<
temperature are made in a menu which is called up by pressing the key
Menu item > AL-TYPE< allows choosing between a warning and
an alarm cut-off for the menu items > OVERTMP< and > SUBTEMP<.
the circulator switches to the active SETPOINT<
(example: <25>).
and the value is changed to 45.00 °C and
key.
key.
68
.