Jonsered CS 2250S II Manual De Usuario página 35

Ocultar thumbs Ver también para CS 2250S II:
Idiomas disponibles

Idiomas disponibles

Spark plug
Electrode gap, in/mm
Fuel and lubrication system
Fuel tank capacity, US
Pint/liter
Oil tank capacity, US Pint/
liter
Type of oil pump
Weight
Weight, lb/kg
Saw chain/guide bar
Type of drive sprocket/
number of teeth
Saw chain speed at 133%
of maximum engine power
speed, ft/s / m/s.
Recommended cutting equipment
A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw models Jonsered CS 2245 II, CS 2245S II,
CS 2250S II met the safety requirements in ANSI
B175.1-2012 and Canadian Standards Association CSA
Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback), when equipped with the below
listed saw chain and guide bar combination(s).
Guide bar
Length, in/cm
Pitch, in
13/33
0.325
15/38
18/46
1049 - 005 - 21.06.2021
Jonsered CS 2245 II
NGK BPMR 7A/ Champion
RCJ 7Y/Husqvarna
HQT-1R
0.020/0.5
0.99/0.47
0.55/0.26
Automatic
11.2/5.1
Spur/7
75.8/23.1
Accessories
Gauge, mm/in
Max. nose ra-
dius
1.3/0.050
10T
Jonsered CS 2245S II
NGK BPMR 7A/ Champion
RCJ 7Y/Husqvarna
HQT-1R
0.020/0.5
0.99/0.47
0.55/0.26
Automatic
11.5/5.2
Spur/7
75.8/23.1
Note:
Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
We recommend only to use the listed guide bar and saw
chain combinations.
Kickback and guide bar nose radius
For guide bars with a sprocket nose the nose radius is
specified by the number of teeth, such as 10T. For solid
guide bars the nose radius is specified by the dimension
of the nose radius. For a given guide bar length, you can
use a guide bar with smaller nose radius than given.
Saw chain
Type
Jonsered H30
Jonsered CS 2250S II
NGK BPMR 7A/ Champion
RCJ 7Y/Husqvarna
HQT-1R
0.020/0.5
0.99/0.47
0.55/0.26
Automatic
11.5/5.2
Spur/7
75.8/23.1
Length, drive
Low kickback
links (no.)
56
Yes
64
72
35
loading

Este manual también es adecuado para:

Cs 2245s iiCs 2245 ii