Alice's Garden ALOMBRA AWM3X2KD Manual Del Usuario página 26

EN
STEP 3A: INSTALLING ON A SOLID WALL
1. Drill the previously marked holes with a drill and 14mm bit. The holes must be at least 9cm deep.
2. Insert the expansion anchors with a hammer (if necessary)
priate Allen key or an adjustable spanner. This action embeds the anchor into the wall.
3. Once the anchors are fixed in the wall, you can remove the screws.
4. Position the awning brackets 13 and screw the screws back in, without forgetting the washers. The
side of the bracket with a notch must be pointing upwards.
5. Repeat this process for the other brackets, once you have checked the brackets are level.
≥9cm
1
≥9cm
Drilled holes Ø14mm
4
14
When they are fully inserted, the brackets must be held firm in the wall.
26
2
14
13
13
If they move, tighten them further.
14
and tighten the screw using the appro-
14
Anchor Ø14mm
5
A
14
3
13
30/09/2019