Idiomas disponibles
Idiomas disponibles
English / USA
Information
Before You Start
STOP
0
The four positions of the
Master Control lever
$ = Engine off –
ignition is switched off.
# # # # = Normal run position –
engine runs or can fire.
To move the Master Control lever from # # # #
n
l
to
or
, press down the throttle
trigger interlock and squeeze throttle
trigger at the same time.
n
n
n
n
=Warm start – this position is used to
start a warm engine. The Master
Control lever moves to the normal
run position as soon as the throttle
trigger is squeezed.
l
l
l
l
=Cold start – this position is used to
start a cold engine.
38
Starting / Stopping
the Engine
Starting Procedure
:
Press in the button to open the
decompression valve.
The decompression valve closes as
soon as the engine fires.
:
For this reason you must press in
the button before each starting
attempt.
STOP
0
:
Observe safety precautions
:
Push hand guard (1) forward:
The chain is now locked.
:
Press down the trigger interlock (2)
and pull the throttle trigger (3) at the
same time.
Set Master Control lever (4) to:
for cold start l
for warm start n
(after engine has been running for
about one minute).
MS 441 C
