Technical Parameters - Orbegozo EX 5000 Manual De Instrucciones

EX 5000
The steam cannot froth.
IMPORTANT
Symptom
Coffee doesn't go out
Coffee comes out slowly or
drop by drop
In the absence of coffee leakage after 10 seconds, stop the coffee maker and renew the coffee from
the pot.
Do not take apart the appliance by yourself if the cause of failure is not found, you had better
contact certified serving center.

TECHNICAL PARAMETERS

Model: EX 5000
Power: 1050W
Voltage: 220 – 240 V ~ 50Hz
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the impact on human health and
the environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation,
that when you dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage
Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU.
The steam ready indicator is not
illuminated.
The container is too big or the
shape is not fit.
You have used skimmed milk
Cause
The water tank is incorrectly
placed
The holes in the pan are stuck
Coffee is too ground or too
pressed
Only after the steam ready
indicator is illuminated, the
steam can be used to froth.
Use high and narrow cup.
Use whole milk.
Corrections
Check the tank
Empty the bowl, clean it with a
dirty cloth and cycle only with
water
Make sure that the grind is
suitable for espresso coffee
makers and that it has not been
pressed too much.
16