IO Mabe IO7660 Manual De Uso página 88

Problem
Burners do not
light
Top burners do
not burn evenly
Burner flames
are very large or
yellow
Surface burners
light but bake
and broil burners
do not
Oven door glass
appears to be
"tinted" or have
a "rainbow"
color
Drawer does not
slide smoothly or
drags
88
Possible cause
Burner slots near the
electrode, or the round
lighter port on the oval
burner, may be clogged.
Food residue on
electrode.
Improper burner
assembly.
Food residue on
electrode.
Improper burner
assembly.
Gas to the oven burners
may have been shut off.
The inner oven glass is
coated with a heat
barrier to reflect the
heat back into the oven
to prevent heat loss and
keep the outer door
cool while baking.
The drawer is out of
alignment.
Drawer is overloaded
or load is unbalanced.
What to do
Remove the burners and clean them.
Check the electrode area for
burned-on food or grease. See the
Care and Cleaning of the range
section.
Lightly polish flat tip of electrode
with nail file or sandpaper until shiny.
Make sure the burner caps are seated
correctly. See the Care and Cleaning
of the range section.
Lightly polish flat tip of electrode
with nail file or sandpaper until shiny.
If range is connected to Propane gas,
contact the technician who installed
your range or made the conversion.
The regulator is located behind the
drawer compartment, near the gas
line attachment on the back of the
range. You may need to remove a cap
to access the regulator. Turn the lever
on the side of the regulator to the
position shown below to turn back on
the gas inlet.
This is normal. Under certain light or
angles, you may see this tint or
rainbow color.
Fully extend the drawer and push it all
the way in. See the Care and Cleaning
of the range section.
Reduce weight or redistribute drawer
contents.