Maintenance - IO Mabe IO7660 Manual De Uso

Maintenance

Oven light
WARNING:
bulb, disconnect the electrical power to the range at the main fuse or circuit
breaker panel. Failure to do so may result in electric shock or burn.
CAUTION:
when cool. Touching hot glass with bare hands or a damp cloth can cause
burns.
CAUTION:
cal power to the range at the main fuse or circuit breaker panel. Be sure to let
the light cover and bulb cool completely.
The oven light bulb is covered with a removable glass cover that is held in
place with a bail-shaped wire.
Remove the oven door, if desired, to reach the cover easily. See the Lift-Off
Oven Door section for detailed oven door removal instructions.
Replacing the light bulb:
1. Disconnect electrical power to the
range.
2. Hold the glass cover stable, so it
doesn't fall when released.
3. Slide near the indent of the cover
holder until the cover is released.
Do not remove any screws to
release the glass cover.
4. Replace bulb with a 40-watt house-
hold appliance bulb. Do not touch
hot bulb with hand or wet cloth.
Only remove bulb when it is cool.
5. Hold glass cover stable over new
bulb.
SHOCK OR BURN HAZARD: Before replacing oven light
BURN HAZARD: The glass cover and bulb should be removed
Before replacing the oven light bulb, disconnect the electri-
6. Pull the wire cover holder near
the indent until the indent in the
wire cover holder is located in the
indent of the glass cover.
7. Connect electrical
range.
Glass cover
Indent
power to
Wire cover holder
83