Cleaning The Cooktop - IO Mabe IO7660 Manual De Uso

Oven racks
All oven racks may be cleaned by
hand with an abrasive cleaner or
steel wool. Self-clean (black) oven
racks may remain in the oven during
the self-clean cycle. Nickel-plated
(silver) racks should not remain in the
oven during the self clean cycle.
Doing so will tarnish the racks. If
either type of rack is left in the oven
during a self-clean cycle, the rack may
become difficult to slide.

Cleaning the cooktop

Control panel and knobs
Wipe the control panel after each use
of the oven with a damp cloth. For
cleaning, use mild soap and water or
a 50/50 solution of vinegar and
water. Rinse with clean water. Polish
dry with a soft cloth.
Do not use abrasive cleansers, strong
liquid cleansers, plastic scouring pads
or oven cleaners on the control
panel—they will damage the finish.
Stainless steel surfaces (on some
models)
Do not use a steel wool pad; it will
scratch the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless
steel cleaner or polish. Always wipe
the surface in the direction of the
grain. Follow the cleaner instructions
for cleaning the
surface.
Use only a liquid cleanser free of grit
and rub in the direction of the brush
lines with a damp, soft sponge.
stainless steel
After cleaning the racks, use a soft
cloth or paper towel to rub a small
amount of vegetable oil on the left
and right edges of the rack. This will
ensure the racks are easy to slide in
and out of the oven.
For easier cleaning, the control
knobs may be removed by pulling
them directly outwards once the
knobs are in the OFF position. Do
not pull knobs up or down or hang
objects on them. This can damage
the gas valve shaft. The knobs can be
washed by hand with soap and
water or in a dishwasher.
To replace knobs after cleaning,
align the hole on the knob backside
with the gas valve shaft and push
inward until the knob is securely
fastened. All knobs are interchangea-
ble.
Surface burner knob
79