Locations and Functions
of Parts
Camera Head
Front
A Lens mount
Attach a microscope adapter or C-mount lens.
B Tripod receptacle (bottom)
When using a tripod, attach a screw for the tripod in
this screw hole.
Use a screw that complies with the following
standards:
ISO standards: l = 4.5 mm ± 0.2 mm
ASA standards: l = 0.197 inches
C Camera cable connector (10-pin)
Connect to the CAMERA connector on the camera
control unit using the supplied camera cable.
Note
Do not connect/disconnect the camera cable when
the power is on.
If you have disconnected the camera cable with the
power on, turn off the camera control unit, then turn
it on again after connecting the camera control
cable.
8
GB
Locations and Functions of Parts /
Rear