Appendix; List Of Messages - Sony iCY-SHOT DXC-S500 Manual De Instrucciones

Appendix

List of Messages

The following messages may appear on the screen. Take
the necessary measures shown below.
Message
White Balance OK
White Balance NG
C.TEMP High
White Balance NG
C.TEMP Low
White Balance NG
Try Again
White Balance NG
Level High
White Balance NG
Level Low
THIS SW IS
INVALID
NO IMAGE
NO SUPPORT TYPE
CHANGE CARD
NO FORMAT
FORMAT OK?
OK-[ENTER-KEY]
NO-[EJECT] CARD
CARD FULL
NO CARD
34
GB
List of Messages
Meaning/remedies
Auto white balance adjustment has
succeeded.
Color temperature is too high.
tChange the color temperature of the
subject to the appropriate level.
Color temperature is too low.
tChange the color temperature of the
subject to the appropriate level.
The camera has failed to adjust the
white balance.
tAdd white part to the subject shot.
If the message appears even if you
repeat adjustment, the camera
needs to be checked. Consult your
nearest Sony dealer.
The video level of the image is too
high.
tRemove any brightly illuminated
subjects from the image shot.
tDecrease the illumination.
tClose the iris opening.
tDecrease the video gain.
Take the measures above, and then
press the WHITE button.
The video level of the image is too low.
tIncrease the illumination.
tWiden the iris opening.
tIncrease the video gain.
Take the measures above, and then
press the WHITE button.
You have pressed the wrong button.
A card that had no recorded pictures
was attempted to be played back.
The camera is not compatible with the
card inserted.
tInsert a card compatible with the
camera.
Uninitialized card is inserted in the
camera.
tAfter confirming that all the
contents of the card may be erased,
initialize the card.
Maximum number of pictures have
been recorded on the card.
tErase unnecessary files, or insert a
new card.
No card is inserted.
tInsert a card into the camera.
Message Meaning/remedies
PROTECT ON A protected file was attempted to be
erased.
tRemove protect and try again.
WB-MANU You have pressed the WHITE button
when the camera is in white balance
manual mode.
tPress the WB MODE button to set
the white balance mode to AUTO.
(page 11)
FAN CHECK ERROR The fan does not work properly.
tContact your nearest Sony dealer or
Sony Customer Service.
CARD PROTECT ON A card with protect function was
inserted into the camera. You cannot
record pictures on it.
tInsert a card without protect
function. (The camera is not
compatible with the write-protect
tab function for a "Memory Stick".)
The temperature of The temperature of CCD becomes
CCD is too high. high.
tCheck the camera head.
Please check the
CAMERA HEAD.
CHU Link Check The camera cable is not connected.
error. tConnect the camera cable correctly.
(page 30)
INITIAL ERROR Initialization of the card has not
TRY AGAIN? succeeded.
YES-[ENTER] tTurn off the camera, turn it on
NO-[EJECT] CARD again, then initialize the card.
CAPTURE ERROR The picture was not captured.
tTurn off the camera, turn it on, and
try to capture again.
ERASE ERROR TRY The picture file was not erased.
tTurn off the camera, turn it on, and
AGAIN
try to erase the file again.
Or, copy the necessary files
recorded on the card to the
computer, and then initialize the
card.
PLAY ERROR The picture could not be played.
tTurn off the camera, turn it on, and
TRY AGAIN
try to play the picture.
REC ERROR The picture could not be recorded on a
TRY AGAIN card.
tTurn off the camera, turn it on
again, and then press the REC
button. Or, copy the necessary files
recorded on the card to the
computer, and then initialize the
card.
NOW LOADING... The camera is now loading the image
data from the card. Wait for a while.
The lithium button battery used to
maintain the internal clock has run out.
tReplace with a CR2032 lithium
button battery.