Idiomas disponibles
Idiomas disponibles
English
5" (125 mm) grinding Wheels
Type 27 guard
Backing flange
Type 27
Depressed center wheel
Locking flange
Type 1/41 guard*
Backing flange
Type 27/42 depressed
center wheel, cutting only
Locking flange
Type 1/41 guards are intended for use with Type 1/41 cutting wheels and Type 27 wheels marked for cutting only.
Grinding with wheels other than Type 27 and Type 29 require different accessory guards. Always use the smallest proper
guard possible that does not contact the accessory.
* nOTE: A Type 1/41 guard is available at extra cost from your local dealer or authorized service center.
16
ACCESSORIES CHART
5" (125 mm) sanding Flap Discs
Type 27 guard
Backing flange
Non-hubbed sanding flap disc
Locking flange
5" (125 mm) Cutting Wheels
Type 1/41 guard*
Backing flange
Type 1/41 abrasive
cutting wheel
Locking flange
Type 27 guard
Hubbed sanding flap disc
Type 1/41 guard*
Backing flange
Diamond cutting wheel
Locking flange
sanding Discs
Rubber backing pad
Sanding disc
Clamp nut
