Idiomas disponibles
Idiomas disponibles
English
Fix the battery compartment to the front of the
machine using the flat washers (J) Ø8 and the screw
(I) M8.
Put the battery in the compartment and screw the
cables coming from the motor to the battery.
Close the battery compartment cover using the flat
washers (J) Ø8 and the screws (P) M8x16.
Plug the cable
connector to the
other end that you
will find on the body
of the machine.
6.2.3. BAFFLE MOUNTING
Attach the deflector (E) to the outlet pipe using the
bolts (K) M6x12 and the nut (O) M6 for the upper part.
For the lower part use the bolts (N) M6x20, the flat
washers (M) Ø6 and the wing nut (L).
6.3. FUEL AND OIL
IMPORTANT: The fuel used for this machine
is highly flammable. If the fuel or the
machine ignites, put out the fire with a dry
powder extinguisher.
Petrol and oil are extremely flammable and
explosive under certain conditions. Do not
smoke and keep flames, sparks or heat
away from the machine.
Use unleaded gasoline 95 octane.
Do not use fuel that has been stored for longer than
2 months. A fuel stored for too long will cause the
starting of the machine to be more difficult and result
in unsatisfactory engine performance. If the fuel
has been in the machine's tank for longer than two
months, empty the tank and replace it with fuel in
perfect condition.
6.3.1. FILLING THE FUEL TANK
1. Choose a suitable area to perform this operation.
2. Remove the fuel tank cap and fill with fuel.
3. Tightly close the fuel tank's cap and remove all the
fuel that spilled with a dry cloth.
WARNING:
Stop the engine before refueling.
Do not start the machine in an enclosed room or
space. The exhaust gases and fumes from the
fuel and oil contain carbon monoxide and harmful
chemicals.
In case of a concentration of gases produced by
poor ventilation, remove area all that impedes the
flow of clean air from the work area to improve
ventilation. Do not return to work in the area unless
you have properly ventilated area and are certain that
36/148
