Idiomas disponibles
Idiomas disponibles
tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power tools may result in serious
personal injury.
WARNING: Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
WARNING: ALWAYS USE SAFETY GLASSES. Everyday
eyeglasses are NOT safety glasses. Also use face or dust
mask if operation is dusty. ALWAYS WEAR CERTIFIED SAFETY
EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA/Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Tool Specifications
MODEL
DESCRIPTION
ENGINE TYPE
OPERATION PRESSURE
RANGE
MAXIMUM OPERATION
PRESSURE
AIR CONSUMPTION AT A
RATE OF 60 FASTENERS
PER MINUTE *
FASTENER GAUGE
FASTENER RANGE
MAGAZINE CAPACITY
LENGTH
WIDTH
HEIGHT
WEIGHT
* The DWFP71917 requires 2.0 cubic feet per minute or cfm (56.6 liters per minute or
lt/min) of free air at 80 psi (5.6 kg/cm
To determine the appropriately sized air compressor, take the actual rate at which the
tool will be run and compare the required cfm (lt/min) to the compressors free air
delivery (cfm/ lt/min) at 80 psi (5.6 kg/cm
5
DWFP71917
16 Gauge Finish Nailer
Oil-Free
70 – 120 psig (4.9 – 8.43 kg/cm
)
2
120 psi (8.43 kg/cm
)
2
2.0 cfm (56.6 lt/min @
80 psi (5.6 kg/cm
)
2
16 Gauge
1–1/4" to 2–1/2" (32 mm – 64 mm)
up to 100 Nails
12-1/2" (316.6 mm)
3-1/3" (84.1 mm)
11-5/16" (288.5 mm)
4.4 lbs (2.0 kg)
) to operate at a rate of 60 fasteners per minute.
2
).
2
