Introduction; Infusion Methods; Diagram Of The Esp - Excelsior Medical ESP-60 Manual De Funcionamiento

Introduction

Excelsior Medical Corp. is a company dedicated to the intermittent administration of drugs via syringe pumps.
The ESP Syringe Pump is a small, compact infusion pump, which infuses doses with 3cc-60cc syringes. It has a
plastic case, syringe clamp, pusher block and membrane type keypad. The pump is user friendly - all user
information is displayed on the pump's front. Three speeds provide versatility to extend delivery time by a factor of
2 or 3. Only one button to start infusion, no drip counting, activation, spiking or admixture. The pump provides
visual and audible alarms for end of infusion, occlusion, low battery, accuracy and system malfunction.
In addition to its syringe pump Excelsior Medical Corp. offers a complete system:
1. Expert analysis of your facility's drug requirements, current method costs and expected cost savings by converting
to syringe pumps.
2. State of the art high speed dispensing pump, tubing and adaptors specifically for syringe batching.
3. Experienced personnel for implementation and training to insure realization of the anticipated cost savings without
any hassle or headache.
4. Toll-free telephone number: (888) ESP-Pump, (888) 377-7867) for ordering products or any assistance.
5. Highest quality alkaline batteries.

Infusion methods

1. As a primary intermittent infusion system in combination with a heparin lock.
2. As a piggyback in combination with a primary IV delivering compatible maintenance fluids or drug diluents, the
primary line flow rate need not be interrupted. The microbore extension set is attached to the primary line at the
lower injection port or flashball site.
3. As a piggyback in combination with an IV controller or IV pump. No change to the pump or controller is required.
The microbore extension set is attached to the primary line at an injection port or flashball site downstream from the
primary infusion device.
4. As a piggyback in combination with a volume control chamber (burette). The flow rate for the burette is not
interrupted. The microbore extension set is attached to the primary line at either the lower injection port or the
flashball site.

Diagram of the ESP

-2-