Idiomas disponibles
Idiomas disponibles
LAWN MOWER SAFETY WARNINGS
Before using, always visually inspect to ensure blades,
blade bolts, and cutter assembly are not worn or
damaged. Check the product before each use and
frequently during operation.
Replace worn or damaged blades and bolts in sets to
preserve balance.
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to be sure the equipment is in safe
working condition.
Check the grass catcher frequently for wear , holes
or deterioration. This can cause objects to be thrown
towards the operator.
Replace worn or damaged parts before operating the
product.
Never operate the mower if the power lever, when
released, does not stop the engine.
Do not operate the product without the entire grass
catcher or the guard of the self-closing discharge
opening in place.
Do not use the product when there is a risk of lightning.
Do not force the product. It will do the job better and
safer at the speed for which it was designed.
Do not overload the product. Mowing long, thick grass
may cause the motor speed to drop or the power to cut
out. When mowing in long thick grass, a first cut with
the cutting height set high will help reduce the load. See
Adjusting the Blade Height.
Stop the blade when crossing gravel surfaces.
Do not pull the product backward unless absolutely
necessary. If you must back the product away from a
wall or obstruction, first look down and behind to avoid
tripping or pulling the product over your feet.
Stop the blade(s) if the machine has to be tilted for
transportation when crossing surfaces other than grass,
and when transporting the machine to and from the
area to be mowed.
Never operate the product with defective guards
or shields, or without safety devices, for example,
deflectors or grass collector, or both, in place.
Carefully start the engine according to instructions and
keep hands and feet away from the cutting area. Keep
clear of the discharge opening at all times.
Never pick up or carry the product while the engine is
running.
Avoid holes, ruts, bumps, rocks, property stakes, or
other hidden objects. Uneven terrain could cause a
slip-and-fall accident.
When not in use, mower should be stored in a well-
ventilated, dry, locked up place, out of the reach of
children.
2
All manuals and user guides at all-guides.com
Follow manufacturer's instructions for proper operation
and installation of accessories. Only use accessories
approved by the manufacturer.
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
Do not change the engine governor settings or over-
speed the engine.
Do not tilt the lawn mower when starting the engine or
while the engine is running. This exposes the blade and
increases the probability of objects being thrown.
Do not start the engine when standing in front of the
discharge chute.
Stop the engine, disconnect the spark plug wire, wait
until the blade comes to a complete stop, and allow the
product to cool down for the following cases:
whenever you leave the product unattended
before cleaning a blockage or unclogging the chute
before checking, cleaning, or working on the product
after striking a foreign object; inspect the appliance
for damage and make repairs as necessary before
restarting and operating the machine.
before clearing the grass catcher
before refuelling
If the product starts to vibrate abnormally (check
immediately):
inspect for damage
replace or repair any damaged parts
check for and tighten any loose parts
If the product strikes a foreign object, follow these
steps:
Stop the product and disconnect the spark plug
wire.
Thoroughly inspect the product and grass catcher
for any damage.
Repair any damage before restarting and continuing
to operate the product.
Allow engine to cool down before storing in any
enclosure.
To reduce the risk of fire, keep the engine, silencer, and
petrol storage area free of grass, leaves, and excessive
grease.
If the fuel tank has to be drained, this should be done
outdoors.
Disconnect the spark plug before making any
adjustment, transporting, or storing the product. Such
preventive safety measures reduce the risk of starting
the product accidentally.
The product is extremely noisy and permanent hearing
loss or damage may result if precautions to limit your
exposure, reduce noise, and wear hearing protection
are not strictly adhered to.
English
