Idiomas disponibles
Idiomas disponibles
6. SERVICE AND TRANSPORT
6.1 Basic troubleshooting before contacting service
If the oven does not operate :
•
The oven may be plugged off, there has been a black out.
If the oven does not heat :
•
The heat may be not adjusted with oven's heater control switch.
If the interior lighting lamp does not light :
•
The electricity must be controlled. It must be controlled whether the lamps are defective. If
they are defective, you can change them as following the guide.
Cooking (If lower-upper part does not cook equally):
•
Check the shelf locations, cooking period and heat values according to the manual.
The hob burners do not operate correctly :
•
Check if the burner parts are correctly assembled(especially after cleaning).
•
The gas supply pressure may be too low/high. For appliances working with bottled LPG, the
LPG cylinder may be depleted.
Except these, if you still have any problem with your product, please call to the Authorized
Service.
6.2 Information related to transport
If you need any transport; keep the original case of product and carry it with its original case when
needed to be carried. Follow the transport signs on packaging. Tape the cooker on upper parts,
caps and crowns and pan supports to the cooking panels. Place a paper between the upper cover
and cooking panel, cover the upper cover, then tape it to the side surfaces of oven. Tape cardboard
or paper onto the front cover on interior glass of oven as it will be suitable to the trays, for the wire
grid in your oven not to damage to the oven door during transport. Also tape the oven door to the
side panels.
If you do not have the original packaging; prepeare a carriage box so that the appliance, especially
external surfaces (glass and painted surfaces) of oven is protected against external threats.
