Control Panel Buttons; Control Panel And Display Features - GE Profile GXCF35GBS Manual Del Propietário

Using the water dispenser.

Control Panel Buttons

Power ON/OFF Button
unit. The button must be on to see the entire display. Never
start the unit without a bottle containing water installed.
SET Button . Advances the control panel display through
SET
the features that are adjustable. When in the SET mode,
"SET" is displayed on the display panel. The control panel will
automatically return to the operating mode if no other button
is pushed within 1 minute, accepting any new adjustments.
Feature Adjustment and Control Panel Lock Buttons. The buttons
are used individually to adjust the feature values when the
control is in the SET mode. The buttons can be pressed and
held for fast scrolling. A Control Panel Lock can be engaged
and disengaged by pressing both the
the same time. When the control panel is locked, no changes
can be made to the control; however, water dispensing is
not affected.
Control Panel Display
Temperature Setting Display. The hot and cold water
temperature settings can be selected to display in either
degrees Fahrenheit or Celsius.
Clock and Timer Display. The clock and day of the week are
displayed normally. When the timer function has been
selected, the clock display is converted to a countdown timer.
Timer Icon . The timer icon is lit when the timer function
has been selected. The icon displays motion when the timer
countdown is active.
Energy Saver—Dispenser Operation Start Time Icon
The light blue start time icon will be lit in the SET mode,
indicating the programmed time when the dispenser is
to begin full hot water operation.
Energy Saver—Dispenser Operation Stop Time Icon
The red stop time icon will be lit in the SET mode,
indicating the programmed time when the dispenser
hot water operation will be shut off.
6
SET
S
E
T
S
E
T
E
. Turns power on or off to the entire
and buttons at
°F
MO TU WE TH FR SA SU
°C
S
°F
E
°C
T
E
and Timer Controls. The TIMER/START button (4) initiates
the display of the countdown timer and starts the
timer. The STOP/CANCEL button (5) stops the timer
function and cancels the timer display. The hourglass
timer icon
selected and active.
Energy Saver ON/OFF Button
NOTE: The clock must be set for the Energy Saver feature to
operate properly. This button turns on and off the programmed
Energy Saver cycle that controls the heater operation to save
energy during low usage periods of the day and week. The default
setting is set at the factory for optimal energy performance—
hot water operation is set to start at 6:00 am and stop at 8:00 pm.
Turning the feature off returns the dispenser to normal operation
and allows the dispenser to continuously produce hot and cold
water 24 hours a day, 7 days a week.
Faucet Light ON/OFF Button
Energy Saver Icon
when the programmed operation cycle has been activated.
In this mode, the icon will display motion of the arrows
indicating hot water operation has been shut off to save
energy.
Control Panel Lock Icon
lit when the lock feature has been engaged.
Hot Water Operation Icon
the hot water system is activated. The steam elements will
move while the heater is operating and all three elements will
.
remain lit when the set temperature has been attained.
Cooling System Operation Icon
displayed when the cooling system is activated. The snowflake
elements will be in motion when the cooling system is
.
operating and all 6 elements will remain lit when the set
temperature is attained. (The snowflake and the 40F (4C)
icons will not be lit during periods of the Energy Saver cycle
even though the cooling system is running to maintain the
compartment temperature.)
TIMER
SET
AM
PM
START
STOP
CANCEL
is displayed while the timer feature is
.
E
. Turns the faucet light on or off.
. The energy saver icon will be solidly lit
E
. The control panel lock icon will be
. The cup will be displayed when
. The snowflake will be