Disposal; Warranty - Parkside PDWS 125 A1 Instrucciones De Uso

CAUTION!
► Never immerse the paint spray gun com-
pletely in solvent.
■ After every use, squirt thinners (only outside
– risk of explosion!) or water through the
appliance.
♦ To clean the housing, the nozzle head
spray holes inside it, use the supplied cleaning
brush or a cloth. Never use petrol, solvents or
cleansers which can damage plastic.
♦ First, unscrew the stroke limiter screw
it in an anticlockwise
♦ Remove the spring
♦ Remove the needle
♦ Clean the needle
(see fig. B).
♦ Replace the needle
♦ Push the spring onto the end of the needle
♦ Screw the stroke limiter screw
it clockwise .
♦ Screw the flow cup
spray gun.
♦ Remove the filter
clean it with the cleaning brush.
♦ Also clean the screw thread
using the cleaning brush (see fig. D).
♦ Replay the filter in the spray gun (see fig. C)
and screw the flow cup
onto it.
♦ For rust protection purposes, you can spray a
little sewing machine oil through the spray gun
after cleaning.
♦ Oil all moving parts from time to time.
♦ After cleaning the needle, the thread and seal
must be lightly greased with a suitable lubricant.
♦ Do not use any silicon-based lubricants.
♦ Store compressed-air appliances only in dry
rooms.
PDFP 500 C3
and the
by turning
direction.
.
using pliers (see fig. A).
carefully with the brush
in the paint spray gun.
tight by turning
anticlockwise off the
as shown in fig. C and
of the flow cup
clockwise firmly

Disposal

The packaging is made from environmen-
tally friendly material and can be dis-
posed of at your local recycling plant.
If you can no longer use your power tool, dispose
of it in accordance with the legal provisions ap-
plicable in your state. This will allow you to ensure
that old power tools are recycled and environmen-
tal pollution is kept to a minimum.
Additional information about disposal is available
on the Internet at www.epa.gov.

Warranty

What does this warranty cover?
The warranty covers:
■ Damage, breakage, or inoperability due to
defect.
■ Damage not accounted by normal wear and
tear or following the safety and maintenance
.
instructions provided in the user manual.
What is not covered by the warranty?
The warranty does not cover damage caused by:
■ Normal wear and tear of the product, including
fragile parts (such as switches, glass, etc.);
■ Improper use or transport;
■ Disregarding safety and maintenance instruc-
tions;
■ Accidents or acts of nature (eg., lightening, fire,
water, etc.).
■ Tampering with the product (such as removing
cover, unscrewing screws etc.)
What is the period of coverage and warranty
resolution?
The warranty is for 3 years from the date of pur-
chase. At our discretion, product will either be
refunded or replaced.
What will we not do?
We will not:
■ Start a new warranty period upon product
exchange;
■ We will not repair product.
│
US - EN 7 ■