Seca 285 Manual De Instrucciones Y Garantía página 89

6. OPERATE SCALES
6.1 Weigh
Start weighing
Weigh babies/toddlers
1. Ensure that there is no load on the scales.
2. Press the Start key
display.
se[A
display's elements appear briefly.
The scales are operational when the display reads
0. 0 0
3. Ask the patient to step onto the scales.
The patient's weight is displayed.
4. Read off the measured result.
You can use the 2 in 1 function to weigh babies and
toddlers. Here the child is held by an adult during
(2 in 1)
weighing. Proceed as follows.
1. Ensure that there is no load on the scales.
2. Press the Start key
display.
3. Ask the adult to step onto the scales.
The adult's weight is displayed.
4. Press the 2 in 1 key.
The weight is saved.
0. 0 0
the NET message appear in the display.
appears on the display, and then all the
.
, the symbol (non-calibratable function) and
English
of the multifunctional
of the multifunctional
Operate scales • 89