CORBERO CC510GB90X Manual Del Usuario página 48

Ocultar thumbs Ver también para CC510GB90X:
Idiomas disponibles

Idiomas disponibles

G
B
Catalytic Walls *
Catalytic walls are located on the left and the right side of cavity under the
guides. Catalytic walls banish the bad smell and obtain the best performance from
the cooker. Catalytic walls also absorb oil residue and clean your oven while it's
operating.
Removing the catalytic walls
In order to remove the catalytic walls; the guides must be pulled out. As
soon as the guides are pulled out, the catalytic walls will be released
automatically. The catalytic walls must be changed after 2-3 years.
Rack Positions
Rack 4
Rack 3
Rack 2
Rack 1
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure, first
remove the lower, and than the upper side from installation location. To install
wire racks; reverse the procedure for removing wire rack.
It is important to place the wire grill into the
oven properly. Do not allow wire rack to touch
rear wall of the oven. Rack positions are
shown in the next figure. You may place a deep
tray or a standard tray in the lower and upper
wire racks.
48
loading

Este manual también es adecuado para:

Cc510gb90wCcsf5gb922wCcsf5gb922x