Idiomas disponibles
Idiomas disponibles
G
PHONES jacks
Connect headphones with standard 6.3mm (1/4") stereo or
4.4mm plugs here (page 12).
o When headphones are connected to this unit, headphone
output will be turned on and audio will stop being output
from the analog audio output (LINE OUT) connectors on the
back of the unit.
H
Display
This display shows information about the audio playing back
and menu screens.
I
VOLUME knob
Use to adjust the volume. Turn right to increase and left to
decrease the volume.
o To enable adjustment of this unit's analog audio output
volume, set LINE OUT LEVEL to VARIABLE ("Line output level"
on page 24). This will enable adjustment of the analog
output level using this unit's VOLUME knob.
o Volume settings are retained separately for analog audio
output and headphone output.
You can use the upconversion function with digital audio input (OPT,
COAX) and USB input (page 23).
The relationships between input sampling frequencies and sampling
frequencies after upconversion are as follows.
Input source
Digital
audio
USB
OFF
2× Fs 4× Fs 8× Fs
input
Input sampling
Sampling frequency after upconversion
frequency
[kHz]
32
−
32
64
44.1
44.1
44.1
88.2
88.2
88.2
88.2
88.2
176.4
176.4
176.4 176.4 176.4 352.8
−
352.8
352.8 352.8 352.8 352.8
−
705.6
705.6 705.6 705.6 705.6
48
48
48
96
96
96
96
96
192
192
192
192
−
384
384
384
−
768
768
768
These values are not converted.
o The maximum upconversion is 8× Fs.
o Upconversion is not possible when the input is DSD.
Upconversion
Upconversion setting
DSD
DSD
256
512
[kHz]
[MHz]
128
256
8.1
16.3
176.4 352.8
11.2
22.5
176.4 352.8
11.2
22.5
11.2
22.5
11.2
22.5
11.2
22.5
192
384
12.2
24.5
192
384
12.2
24.5
192
384
12.2
24.5
384
384
12.2
24.5
768
768
12.2
24.5
EN
15
