Sony MDR-DS3000 Manual De Instrucciones página 25

Symptom Cause and remedy
The DOLBY , The digital audio output setting for the DVD player (including game
DIGITAL indicator
does not turn on
, Playback signals are not recorded in Dolby Digital format.
, The audio for the chapter being played is not a Dolby Digital signal.
The DOLBY PRO
, The EFFECT switch on the processor is set to "OFF."
LOGIC II indicator
, Analogue input signal, digital input PCM signal, or Dolby Digital 2-channel
does not turn on
The DOLBY PRO
, The EFFECT switch on the processor is set to "CINEMA" or "MUSIC" mode.
LOGIC II indicator
, Analogue input signal, digital input PCM signal, or Dolby Digital 2-channel
turn on
The DTS indicator , The DTS digital output setting on the DVD player (including game machines)
does not turn on
, Playback signals are not recorded in DTS format.
, The audio for the chapter being played is not a DTS signal.
, The DVD player does not support DTS format.
The batteries , Check if the CHG indicator turns on. If not, put the headphones on the
cannot be
charged
, Dry batteries are installed.
, Rechargeable batteries other than the supplied are installed.
Infrared signal , Signal noise is output from the connected analogue component.
emission does not
stop (when the
INPUT SELECT
switch on the
processor is set
to "ANALOG")
machines) may be set to "PCM."
See the instruction manual of your DVD player, and change the setting (such
as "Dolby Digital/PCM" or "Dolby Digital") for usage with components
having built-in Dolby Digital decoders.
signal is not input.
signal is input.
is set to "OFF."
See the instruction manual of your DVD player, and change the DTS digital
output setting to "ON."
Use a DVD player that supports DTS.
processor correctly so that the CHG indicator turns on.
• Insert the supplied rechargeable nickel-metal hydride batteries.
• Insert the supplied rechargeable nickel-metal hydride batteries.
• Set the INPUT SELECT switch on the processor to "DIGITAL," and make
sure playback of the component connected to the DIGITAL IN jack is
stopped.
Additional Information
GB
25