IMPORTANT
:
During the transport of the machine, the latter should never be reversed nor be put on either
side. The machine is only to rest on its four feet.
2.2 PICTOGRAMS
Pictograms included in the machine entail the following:
READ
INSTRUCTIONS
MANUAL
USE SAFETY GLOVES
3.
ASSEMBLING INSTRUCCIONS
3.1 DELIVERY CONDITIONS
SIMA bending and combined machines are delivered individually packed on a reinforced pallet. The following
items are sent together with the machine:
3.2 ACCESSORIES ASSEMBLING
For transport reasons, the plate safety guard (P, Fig.3) and the wheels kit (Fig.3.1) are disassembled.
Before using the machine, the plate safety guard should be mounted. The latter presses a security micro-
switch (M, Fig.4). In the counter case, the machine would not start.
3.3 COMMAND AND CONTROL PANEL
We will describe in (Fig. 5) the functionality of each of the knobs, switches, mechanisms and controls of the
machine.
1. Bending plate direction Selector: It selects the direction of the rotation of the bending plate.
2. Yellow Knob: It is used when we rose up the foot from the pedal or press any emergency stop, in case of
accidents or errors, and we want the bending plate back to its point of origin.
3. Green pilot: The ignited pilot indicates that the machine has got tension and has selected a sense of
rotation.
USE HELMET AND EYE AND EAR
DEFENDERS
USE SAFETY FOOTWEAR
6
ENGLISH
