Controlling Your Tv With The Supplied Remote; Preparing The Remote For Controlling The Tv; Saving Power In Standby Mode - Sony BDV-F700 Manual De Instrucciones

Controlling Your TV with
the Supplied Remote
By adjusting the remote signal, you can control
your TV with the supplied remote.
Note
• When you replace the batteries of the remote, the
code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.
Preparing the remote for
controlling the TV
Press and hold TV [/1 while entering your
TV's manufacturer's code (see the table)
using the number buttons. Then release TV
[/1.
If the setting is unsuccessful, the currently
registered code is not changed. Re-enter the
code number.
Code numbers of controllable
TVs
If more than one code number is listed, try
entering them one at a time until you find the
code that works with your TV.
Manufacturer
SONY
SAMSUNG
LG
PHILIPS
PANASONIC
TOSHIBA
Saving Power in Standby
Mode
Check that the following settings in [System
Settings] are made:
– [Control for HDMI] in [HDMI Settings] is set
to [Off] (page 45).
– [Quick Start Mode] is set to [Off] (page 55).
50
GB
Code number
01 (default)
02, 08
05
02, 03, 07
06
04