Makita M2300 Manual De Instrucciones página 8

1
Fig.16
► 1. Wrench 2. Center cover
1
Fig.17
► 1. Hex bolt
Press the shaft lock to lock the spindle and use the
wrench to loosen the hex bolt clockwise. Then remove
the hex bolt, outer flange and blade.
1
Fig.18
► 1. Hex bolt 2. Wrench
To install the blade, mount it carefully onto the spindle,
making sure that the direction of the arrow on the sur-
face of the blade matches the direction of the arrow on
the blade case.
1
2
Fig.19
► 1. Blade case 2. Arrow 3. Arrow 4. Saw blade
Install the outer flange and hex bolt, and then use the
wrench to tighten the hex bolt (left-handed) securely
counterclockwise while pressing the shaft lock.
1
Fig.20
► 1. Hex bolt 2. Outer flange 3. Saw blade 4. Inner
flange 5. Spindle
Return the blade guard and center cover to its original
position. Then tighten the hex bolt clockwise to secure
the center cover. Lower the handle to make sure that
the blade guard moves properly. Make sure shaft lock
has released spindle before making cut.
2
Dust bag
1
Fig.21
► 1. Dust bag
8 ENGLISH
2
3
2 4 5
3
4